Explosion-proof road (platform) light BLC8600 Recruitment dealers 
 BFC8100 BFC8110 BFC8120 BFC8130 BFC8140 BFC8182 BFC8920 BFC8930 BLC8610 BPC9700 BPC8710 BPC8720 BPC8730 BPC8731ON BTC8200 BTC8210 BXE8401 BYE8310 FW6100GF-J FW6101 FW6102 FW6300 IW5110 IW5130LT 
 XY-BLC8600 Explosion-proof road lamp 
 Scope: 
 ● the Company to meet the petroleum, petrochemical, metallurgy, railway, power plants, ships and other inflammable and explosive places lighting needs, developed the production of XY-BLC8600 Explosion-proof road lamp, widely used in places and a variety of flammable and explosive work site for a fixed indoor lighting. 

 Features: 
 ● Explosion-proof function: By authority of the State Explosion-proof, explosion-proof in full accordance with national standards of production, the highest level of proof, the work of workplace safety in flammable and explosive. 
 ● energy-saving light efficiency: selection of high-intensity gas discharge lamp as the light source, high luminous efficiency, high color, light, soft, uniform illumination, the average life of up to 10,000 hours, CRI> 90. 
 ● For the environment: the shell used special high-hardness alloys, structure and integration of multiple damping design, sophisticated design and surface sealed with a strong shock and impact resistance, durable, dust-proof corrosion, in the outdoors a variety of harsh environments and long-term use. 
 ● Easy installation: boom-style, ceiling and wall mounting, easy to operate. 

 Technical parameters: 
 ● Explosion-proof mark: Exd IICT4/T6 
 ● Rated voltage: 220VAC 50Hz 
 ● Rated Power: 250W/400W 
 ● Enclosure: IP65 
 ● Insulation class: I 
 ● Corrosion rating: WF2 
 ● Inlet thread: G3 / 4 
 ● the introduction of cable: φ10 ~ φ12mm 
 ● from the high ratio: 4 
 ● Dimension: φ445 * 465mm 
 ● Weight: 8.3Kg 

 Usage: 
 ● According to the actual needs of the job site to determine the lamp and ballast box installation location and method, according to the ballast box to the 220V power supply contacts to prepare the appropriate length of the distance 10 ~ 12mm three-core cable (not more than 2 meters away can be equipped with light cable). 
 ● When replacing lamps and ballast between the cable box, use M8 hex wrench unscrew the lamp housing on the six M8 hex bolt, pull out the lamp, the lamp comes with three-core removed cable, then connect the original wiring prepared by the three-core cable. 
 ● Open the ballast box cover, loosen the ballast tank conduit compression nut, the lighting cable, power cable through the compression nut, respectively, introduced into the ballast tank within the terminal, press box identified within the connected cable, then tighten the cable gland nut, covered with ballast cover. 
 ● Enter the ballast tank at the other end of the cable connected to 220V power supply can be explosion-proof lighting requirements. 
 ● replace the lamp, first cut off the power, check the chain hoists are hung, and then use the hex wrench lights spin inside the shell of the six hex bolts, be careful to the down part of the lamp body, the lamp body and lamp cover separation Unscrew the old bulb replaced with a new lamp. 

 Note: 
 ● replace the bulb, wipe the glass must be cut off and the power lamp lights to be carried out after cooling. 
 ● use, the light surface of a certain temperature, is a normal phenomenon; transparent pieces of center temperature is higher, not touch. 
 ● lamps off during use, immediately turned on the lamp does not start, this is a normal phenomenon; until the lamp to cool 15 to 20 minutes after the re-start to normal lighting; hot start should be avoided so as not to damage the bulb. 
 Warning: 1, non-charged openings; 
 2, replacement bulbs and cut off the power before demolition lamps. 

 Quality Assurance: 
 ● The company has passed ISO9001: 2008 international quality system certification audit, the product strictly enforce the ISO9001 international quality management system standards of production, ensure quality of products fully meet the national standards and design requirements, product implementation of 7-year warranty (light protection for one year), since seven years from the date of purchase, the product under normal use of any failure by the Company free maintenance. 


 Explosion proof lights road lights street lights marine Wang Tong Wang Tong street lights marine lights marine Wang glare glare glare lamp lights marine floodlights marine Wang Wang glare floodlights glare glare glare through the street Ocean King through the Ocean King street road lighting road lighting street light pole 
 Brand: Xinyuan Wang China National Offshore marine marine Wang Yueqing Wang http://www.cxinyuan.com 
 Wenzhou Xinyuan Lighting Engineering Co., Ltd. 
 Sales Hotline :0577 -62,125,555 
 Contact: Lee 18058309111