XY-NFE9100 emergency roof lights glare] [Recruitment dealers work light hanging lamp floodlight searchlight lights xenon lamp flashlight multi-functional remote control car light 
 NSE9720 NSC9700 NFC9112 NFC9175 NFE9100 proof energy-saving lamp dome lamp NFE9180 NGC9850 NGC9810 ZT6900 NFC9110 road Flashlight NSC9730 NTW9270 BFC8100 BTC6150 BFC8120 BFC8130 BFC8183 BFC8920 BLC8600 BPC8700 BYC6170 BXE8400 floodlight fluorescent BYW6223 BYW6130 JW7500 T5180 JW7620 JW7300 

 Scope: 
 ● suitable for a variety of indoor and outdoor workplaces, the Chinese coal industry, oil, Sinopec, CNOOC, power, metallurgy, railway, steel, shipbuilding, military, public security and fire, chemical, government departments and large enterprises use to do emergency lighting . 

 Structural characteristics: 
 ● high-efficiency gas discharge lamp as the light source and light distribution through advanced design and special treatment, even soft light, no glare, the average life of 10,000 hours or more. 
 ● high-strength aluminum alloy case and optimized structure design, with high impact resistance and shock resistance. 
 ● the use of wide regulator, constant power technology and special circuits. Type A in the main electrical power can be immediately launched the emergency lighting, can also be an external switch control at any time during a power outage in the main electric start; B-type simply as a normal emergency lighting is turned off. D-Lighting can be used as normal, but with emergency functions. 
 ● high-tech surface coating technology, protection grade IP65, to ensure that lighting does not corrode in the harsh environment, does not rust. 
 ● independent of cavity design, thermal performance, greatly improved the life of the lamp; easy maintenance, simple. 
 ● compact structure, beautiful appearance, easy installation, can be a variety of embedded and ceiling installation. 

 Technical parameters: 
 ● Rated voltage: AC220V 
 ● Rated Power: 35W/70W 
 ● Emergency Response Time: 90min/45min 
 ● Charging time: <20h 
 ● Housing Protection: IP65 
 ● Insulation class: I 
 ● Corrosion rating: WF2 
 ● Inlet thread: G3 / 4 
 ● from the high ratio: 1.3 
 ● Dimensions: Lamp: 300 * 300 * 208mm ballast box: 240 * 202 * 132mm 
 ● Weight: Lighting: 4.5Kg ballast box: 6.2Kg 

 Usage: 
 ● 1, according to the site environment and the need for illumination, lamps and ballast box to confirm the installation location and proper installation. 
 ● 2, ceiling installation: Use two M8 screws to fight the expansion of the M8 on the ceiling or support beam in ordinary screws (screw length from the set); flush mounting: direct use four M6 screws fixed to the lamp corners of the mounting screw hole. 
 ● 3, in determining a good location to install lighting, lamps and ballast tank will be fixed. 
 A, B-type input 
 Note: The white cable (left), said power cord 
 ● 1, red, black 220V power connection 
 ● 2, brown, blue for the emergency switch line (two lines shorted) 
 ● 3, yellow and green wire is the ground wire 
 A, B-type output 
 Note: the black cable (right), said light line 
 ● 1, red, black then light 
 ● 2, yellow and green wire ground 
 D-type input 
 Note: The white cable (left), said power cord 
 ● 1, red, black pick 220V (normal light) 
 ● 2, brown, blue, connected 220V (battery) 
 ● 3, yellow and green wire is the ground wire 
 D-type output 
 Note: The white cable (right), said light line 
 ● 1, red, black then light 
 ● 2, brown, blue for the emergency switch line (two lines shorted) 
 ● 3, yellow and green wire is the ground wire 
 ● 4, replace the lamp, first disconnect the power, unscrew the lamp on the front glass panel fixed screws through 
 Hanging chain structure, the panel light hanging lamp shell, you can unscrew the old bulb and put a new bulb. 

 Note: 
 ● 1. Non-professionals shall not disassemble lamps. 
 ● 2. Use, the light surface of a certain temperature, is a normal phenomenon; transparent pieces of center temperature is higher, may not touch it directly. 
 ● 3. Change a light bulb, you should use the same type, the power of light bulbs; or if the power to change the bulb type, supporting the ballast should be replaced accordingly. 
 ● 4. If the emergency electrical boxes for long periods of use, every four months in case of emergency electrical battery charging, fully charged and then re-place (charging time is 8 h). 
 ● Warning: 1. Not at minus 20 degrees below the environment; 
 2 lighting installation and maintenance, you must first disconnect the power; 
 3 lighting must be grounded. 
 Quality Assurance: 
 ● The company has passed ISO9001: 2008 international quality system certification audit, the product strictly enforce the ISO9001 international quality management system standards of production, ensure quality of products fully meet the national standards and design requirements, product implementation of 7-year warranty (light protection for one year), since seven years from the date of purchase, the product under normal use of any failure by the Company free maintenance. 

 Wang Qiang marine lights marine floodlights cast light marine marine Wang Wang Changshou dome hanging lamp glare shock Spotlights NFC9110 NSC9730 NTW9270 BFC8100 BTC6150 BFC8120 BFC8130 BFC8183 BFC8920 Ocean King Earthquake Spotlights wide high-pressure fluorescent sea king high dome stadium dome stadium full automatic floodlight light work light work light lift lifting light floodlight floodlights full auto mobile lighting beacon channel auxiliary lighting energy saving lamp energy saving lamp maintenance-free roof dome light glare floodlights hot start saving energy floodlight Ocean King floodlight 

 Brand: Xinyuan Wang China National Offshore marine marine Wang Yueqing Wang http://www.cxinyuan.com 
 Wenzhou Xinyuan Lighting Engineering Co., Ltd. 
 Sales Hotline :0577 -62,125,555 
 Contact: Lee 18058309111