XY-NSC9700 glare through street dealers] [Recruitment work light hanging lamp floodlight searchlight [] [] [multifunctional flashlight] [Xenon lamp lights] [remote control car light] 
 NSE9720 NSC9700 NFC9112 NFC9175 NFE9100 [energy saving lamps] [explosion-proof dome light] NFE9180 NGC9850 NGC9810 ZT6900 NFC9110 [road lamp] [flashlight] [road lamp] NSC9730 NTW9270 BFC8100 BTC6150 BFC8120 BFC8130 BFC8183 road lamps] [explosion-proof BFC8920 BLC8600 BPC8700 BYC6170 BXE8400 Pan light fluorescent BYW6223 BYW6130 JW7500 T5180 JW7620 JW7300 

 Scope: 
 ● To meet the railway tunnels, highways, electric power, metallurgy, petrochemical, and various types of plant, plant, bridges, station, square and large facilities, stadiums and other lighting characteristics and needs, the latest research and development of the XY-NSC9700-type anti-reflection through the street No glare, no ghosting, shock resistant, energy saving, safe and reliable. 

 Features: 
 ● Anti-glare function: use nano photocatalyst glass, can automatically break down surface stains and maintain light transmission effect; also use diffuse technology and protection angle design can effectively prevent glare, can effectively reduce the operating, construction workers eye irritation, avoid discomfort and fatigue. 
 ● energy-saving light efficiency: use a special gas-discharge lamps as the light source, high luminous efficiency, long life; use of double-tube HPS lamp without cooling and re-start can be initiated immediately. 
 ● For the environment: the use of high-strength alloy materials, with a strong ability of anti-collision and impact strength; multi-channel vibration structure and surface spray treatment, in the workshop, roadbed, tracks and other high-frequency vibration and humidity, high temperature and long-term stability . 
 ● Installation: Wall and ceiling and other installation in the angle according to the need to be adjusted up and down the 25 range. According to the site need to fit different diameter cables, and lights and even multi-use, lighting project for the layout. Electronic, mechanical double protection devices, power off automatically after opening the lid, use more secure and reliable maintenance. 

 Technical parameters: 
 ● Rated input voltage: V 220 
 ● HPS Discharge: 
 ● flux 400W: lm 52000 
 ● Average life: h 50000 
 ● flux 250W: lm 27500 
 ● Average life: h 50000 
 ● MH discharge lamps: 
 ● flux 400W: lm 38000 
 ● Average life: h 20000 
 ● flux 250W: lm 23000 
 ● Average life: h 20000 
 ● Dimension: L * W * H 400 * 380 * 200 
 ● Weight: 16Kg 

 Usage: 
 ● 1, according to the site environment and lighting needs, identifying where and how the lighting installation will be the fixed installation, according to a 220V power lighting installation location from contacts, prepare the appropriate length of cable. 
 ● 2, unscrew the light cover the upper part of the two fixed-wing bolts before opening the front cover, one end of the prepared cable into the device through the introduction of light compression nut cavity, seat marked in accordance with the polarity of wiring, wiring, then tighten the compression nut into the device. 
 ● 3, close the front cover, tighten the top two butterfly bolts, then connect the other end of cable to 220V power lighting. 
 ● 4, multi-lamp used in parallel, the introduction of devices from the introduction of another cable wiring by the above method, and then connect with other lamps; single lamp use, the introduction of the device idle stuffed with a plug. 
 ● 5, loosen the bracket screws on both sides, can be adjusted within the range in the upper and lower 15 lighting angle. 
 ● 6, the inside cavity with a light rod, turn on the light cover according to the need to prop up. 

 Note: 
 ● 1, transportation will be equipped with lamps mounted on the carton, and install foam cushioning. 
 ● 2, when used, has some light surface temperature is normal; transparent pieces of center temperature is higher, may not touch it directly. 
 ● 3, replace the bulb, try to use the same types of light bulbs; or if the power to change the bulb type, supporting the ballast should be replaced accordingly. 
 ● 4, the introduction of the cable light cavity temperature should be not less than 120 ℃ (such as silicone rubber, PTFE cables, etc.). 
 ● Warning: 1. Can not be installed directly on combustible materials; 
 2 lighting installation and maintenance, you must first disconnect the power; 
 3 lighting must be grounded. 

 Quality Assurance: 
 ● The company has passed ISO9001: 2008 international quality system certification audit, the product strictly enforce the ISO9001 international quality management system standards of production, ensure quality of products fully meet the national standards and design requirements, product implementation of 7-year warranty (light protection for one year), since seven years from the date of purchase, the product under normal use of any failure by the Company free maintenance. 

 Brand: Xinyuan Wang China National Offshore marine marine Wang Yueqing Wang http://www.cxinyuan.com 
 Wenzhou Xinyuan Lighting Engineering Co., Ltd. 
 Sales Hotline :0577 -62,125,555 
 Contact: Lee 18058309111