Today [Recommended] XY-NSC9720 glare through street lighting Wenzhou Xinyuan provide professional floodlights, spot lights price comparison is an ideal choice for your purchase. __________XY. Stall. Recruitment Agents. 

 〓 〓 NSC9720 scope: 
 ● To meet the railway tunnels, highways, bridges, public venues and various production companies and other anti-glare lighting needs, the latest research development and production of XY-NSC9720-type glare through the street, widely used in tunnels, roads, bridges, large-scale facilities, plant, field stations and other places for road, tunnel floodlights. 

 〓 〓 NSC9720 Features: 
 ● design and selection of the protection angle mirror coating technology to achieve anti-glare effect, can effectively reduce the operating, construction workers eye irritation. Avoid discomfort and fatigue. Use of gas-discharge light sources. High luminous efficiency, long life, power factor greater than 0.9, good light transmission, long life of 10,000 hours. 
 ● special surface coating and sealed, to ensure that lighting in the humid, high temperature corrosion and other harsh environments never, never rust. Multi-shock design and high-strength alloy casing, to ensure that their tracks in the roadbed, bridges, tunnels and other high-frequency vibration and long-term security. Pedestal, ceiling and wall and other installation, illumination angle in accordance with environmental needs in a wide range adjustable up and down 180. 

 〓 〓 NSC9720 technical parameters: 
 ● Rated voltage: V 220 
 ● Light (MH gas discharge lamp): 
 70W luminous flux: Im 5500 
 100W Luminous flux: Im 9000 
 150W Luminous flux: Im 13000 
 ● Average life: h 10000 
 ● Light (HPS HID): 70W luminous flux: Im 6000 
 100W Luminous flux: Im 9600 
 150W Luminous flux: Im 16000 

 ● Average life: h 30000 
 ● Fuse size: A 3 
 ● the introduction of cable: φ8 ~ φ10mm 
 ● Dimension: L * W * H 340 * 270 * 193mm 
 ● Weight: 4.6Kg 

 〓 〓 NSC9720 use: 
 ● 1, according to the site environment and lighting needs, identifying where and how the lighting installation will be the fixed installation, according to the lighting to 220V power supply contacts of the distance, prepare the appropriate length of cable. 
 ● 2, unscrew the light cover the upper part of the two fixed-wing bolts before opening the front cover, one end of the prepared cable into the device through the introduction of light compression nut cavity, seat marked in accordance with the polarity of wiring, wiring, then tighten the compression nut into the device. 
 ● 3, close the front cover, tighten the top two butterfly bolts, then connect the other end of cable to 220V power lighting. 
 ● 4, multi-lamp used in parallel, the introduction of devices from the introduction of another cable wiring by the above method, and then connect with other lamps; single lamp use, the introduction of the device idle stuffed with a plug. 
 ● 5, loosen the bracket screws on both sides, can be adjusted within the range in the upper and lower 15 lighting angle. 
 ● 6, the inside cavity with a light rod, turn on the light cover according to the need to prop up. 

 〓 〓 NSC9720 Note: 
 ● 1, transportation will be equipped with lamps mounted on the carton, and install foam cushioning. 
 ● 2, when used, has some light surface temperature is normal; transparent pieces of center temperature is higher, not touch. 
 ● 3, replace the bulb, try to use the same types of light bulbs; or if the power to change the bulb type, supporting the ballast should be replaced accordingly. 
 ● 4, the introduction of the cable light cavity temperature should be not less than 120 ℃ (such as silicone rubber, PTFE cables, etc.). 
 ● Warning: 1, can not be installed directly on the combustible material; 
 2 Replace any cracked protective screen already; 
 3, installation and maintenance of lamps, you must first disconnect the power; 
 4, lamps must be grounded. 

 〓 〓 NSC9720 Quality Assurance: 
 ● The company has passed ISO9001: 2000 international quality system certification audit, the product strictly enforce the ISO9001 international quality management system standards of production, ensure quality of products fully meet the national standards and design requirements, product implementation of 7-year warranty (light protection for one year), since seven years from the date of purchase, the product under normal use of any failure by the Company free maintenance. 

 Wang Qiang marine lights marine floodlights cast light marine marine Wang Qiang light work light work light floodlight glare light ocean king dome light glare glare glare lights marine floodlights floodlights glare Wang Plaza lamp longevity dome light ocean energy Ocean Energy Plaza, Wang Wang Changshou dome lamp hanging lamp glare cast light earthquake shock ocean king cast a wide voltage fluorescent light marine Wang efficient full-dome stadium stadium dome light and efficient automatic pan lifting light light flood light work light work light automatically pan down Omni-directional beacon of light lighting energy channel auxiliary lights glare lamp ceiling lamp Ceiling lamp maintenance-free energy saving floodlight floodlights hot start saving floodlights Ocean King 

 Brand: Xinyuan Wang China National Offshore marine marine Wang Yueqing Wang http://www.cxinyuan.com 
 Wenzhou Xinyuan Lighting Engineering Co., Ltd. 
 Sales Hotline :0577 -62,125,555 
 Contact: Lee 18058309111