XY-YFW6210 remote control searchlight 
 Xinyuan Wang torch lighting Recruitment dealers marine marine marine searchlight Wang Wang Wang marine floodlights floodlights factory outlets factory direct marine explosion-proof lamp projection lamp factory direct ocean king king dome light flashlight manufacturers factory direct manufacturer of Wenzhou Searchlight 
 Xinyuan product obtained ISO9001 certification, quality assured by the national standard GB3836-2010 
 Contact: Lee 18058309111 
 Application: suitable for a variety of high-altitude operations, and wilderness, sea and other workplace-round, multi-angle, long-range patrol, tracking, search, rescue and work construction lighting needs. 
 Features: * Distance: radiation from the condenser effect, lighting, high brightness, exposure range up to 1200 meters. * Working hours: working time 10-30V DC external power supply, can make full use of car (12V), ship (24V), and other electrical and mechanical equipment of large capacity battery to work long hours; such as purchasing power converter (AC-DC), then can be used directly 220V (or 110V) AC power continuously. * Illumination angle: angle of illumination according to the job site lighting up and down, left free to adjust the angle of rotation, and adjustable speed, elevation 68 degrees upward, downward angle from 30 degrees, left rotation can reach 440 degrees can quickly achieve full , multi-angle lighting. * For properties: application features can be loaded in the automotive lighting, moving lighting on the ship can also be installed in the tower, derrick, and other electrical and mechanical equipment on fixed lighting, but also a strong magnetic bracket matching method using magnetic force constant. Imports of high hardness alloy casing to withstand strong impact resistant high-pressure water cannons direct and violent invasion waves. * Operation: Operation wireless remote control and wire in parallel in two ways, wireless remote control can be moved within 30 meters in control, remote control operating panel can be installed in the cab (cabin), workplaces and other indoor use. * Automatic protection: automatic protection Input voltage too high or too low, the light will automatically cut off the light output, when the voltage is then switched back to normal lighting. 
 Usage: * fixed a direct install lighting: lamp corresponding flange mounting holes drilled on the body of the installation and then install the body between the flange and the installation of waterproof seals and spring washers, flat washer sets in M50 bolt on, then bolt through the mounting holes and tighten the nut at the other end of the can. b Install Base: corresponds to the installed base is installed on the drill body, fixed with rivets in the holes on the painted glass, plastic, and then M55 bolt to the lamp according to a method of mounting flange holes on the base of the corresponding available. c strong magnetic bracket (optional): use, the first magnetic force transferred to the closed position, and then placed in a magnetic block to install the ferromagnetic metal objects, and then transferred to the open position will be magnetic, with a spring mattress pad Peace set screws on the M55, even the three hooks fixed to the bottom of the lamp, into the corresponding position of the magnetic seat after about an appropriate rotation, until the pins lock can be injected into the holes. * Use a car battery power: the power output line of the two terminals are set in the bolt on the battery's positive and negative (brown then positive, then negative blue), then tighten the bolt, then the connector bracket (magnets type) connector plug fixed in position, use the P-type docking connector can be tightened; b power adapter (optional): the converter plug electrical outlet in the city (ie lights normal), then the lighting of the P-type connector plug of the converter docking connector plug and tighten to; c 24V spare battery pack (optional): the lighting of the P-type connector plug of the battery pack output socket and tighten the butt can. * First to use the remote control remote control and insert the two AA batteries, and then push the remote control slide switch to "on" position, according to the text prompts and instructions arrow buttons, you can switch lighting in 30 meters, adjust the lamp direction. Metal box (optional) use: a small metal box: store fixtures designed for use, and is equipped with straps, easy to carry. b large metal box: You can also store the power adapter, magnetic base, lamp, both the sides and top of the handle, and then to move. 
 Note: * transportation shall lamps mounted on the inside with cardboard boxes, and install foam cushioning. * After using the remote control, be sure to push the slide switch to "off" position, causing the battery to avoid static current consumption, when not long, the battery should be removed. * Replace the lamp, the power must be disconnected. * When using the 24V power supply, connection cable for extension must be used 2.5mm2 cable lines; a 12V power cable can not be extended. * Normal use, the light surface of a certain temperature, is a normal phenomenon; transparent pieces of center temperature is higher, do not touch. 
 Technical parameters: Rated voltage :12-30VDC / 180-250VAC operating current: 9 +1 A irradiation distance: 1200m Remote control effective range: 30m Dimension: 275 × 220 × 445mm (L × W × H) Weight: 6.5kg enclosure rating : IP66 
 Quality Assurance: This product is in strict accordance with ISO9001: 2000 international quality management system standards for quality control to ensure product quality is higher than the national standard, fully meet the design requirements, the implementation of three-year product warranty, since the three years from the date of purchase, when used normally under any failure by the Company free maintenance. 
 SFW6110A T5180 JIW7500 JW7621 SFD3000A YFW6210 YFW6211/HK1 IW5100 JIW5280 JW7210 JW7300B JW7300 RJW7101/LT DGS70/127 (A) DGS70/127B (B) DGS70/127 (C) DGY100/24 ??BFC8120 PBC8720 NSC9720